(This article is based on the assumption that you have the actual sensor hardware and does not apply to the Camera sensor.)
On occasion, you may see “Buy Sensor” displayed if the sensor is not detected when first used.
After the sensor has worked once or twice, if it is not detected you will get the “No Sensor Found” error code displayed.
For iOS devices, the resolution is the same for either error code:
Remove and reconnect the IBT connector.
Remove any cover from the device and reconnect the IBT connector, if the connector is not fitting well or you are still getting the error code. Re-start the Device.
For Android devices:
Make sure that you bond the Bluetooth sensor with the app, not the device and the sensor power is turned on prior to opening the app. Open the app and tap the Start / Play arrow to begin scanning for the sensor.
PLEASE NOTE: If you are using a Lightning Adapter on an older iOS device, make sure the adapter is a genuine Apple product. Most third party adapters are for charging only and not two-way data transport.